Official Freematics Hardware
ESPRIT-C3 - ESP32-C3 in Arduino UNO form factor
Freematics ESPRIT-C3 is an Espressif ESP32-C3 RISC-V development board in Arduino UNO form factor with extra I2C, UART, JTAG interfaces.
Features
- Compatible with Arduino UNO pinouts
- Up to 240MHz clock frequency
- 520kB internal SRAM, 4MB Flash
- Integrated 802.11 BGN WiFi and dual-mode Bluetooth (classic and BLE)
- Onboard xBee socket for pluggable cellular modules
- I2C and serial UART pinouts
- JTAG pinouts
Pinouts
Freematics Esprit leads out nearly all useful ESP32’s GPIO pins, arranged in a deliberated order, to balance between accessibility and Arduino compatibility.

Extra pinouts In addition to standard Arduino pin headers as following.
- 4-pin I2C header: SDA(GPIO4), SCL(GPIO5), 3.3v, GND
- 4-pin serial UART header #1: Rx(GPIO18), Tx(GPIO19), VCC (3.3V/5V), GND
- xBee socket: Rx(GPIO32), Tx(GPIO33), VCC (3.3V/5V), GND
The VCC switch toggles between 3.3V and 5V for VCC pins for serial UART header and xBee socket. The VCC/GND pins on UART header can be used to power the board when switched to 5V by Freematics OBD-II UART adapter. The standard xBee socket VCC voltage is 3.3V, while all our cellular modules require 5V VCC.
Links
Technical confidence before purchase
Add product metafields for specifications, compatibility, firmware, downloads and what is included. This section is intentionally technical to suit Freematics buyers.
Best for: vehicle telemetry, diagnostics and data logging.
Compatibility: update per product model.
Documentation: link manuals, GitHub repositories and firmware downloads.